Good insulation is one of the best investments a Wellington homeowner can make — cutting heating bills, improving comfort, and meeting NZ's Healthy Homes Standards for rental properties. Here's what insulation costs in Wellington in 2026.
Wellington Insulation Costs 2026
| Service | Wellington typical cost (installed) |
|---|---|
| Ceiling insulation (standard 3-bed home) | $1,800–$4,500 |
| Underfloor insulation (standard 3-bed home) | $1,200–$3,000 |
| Wall insulation (retrofit, per m²) | $80–$200/m² |
| Ceiling + underfloor (combined, 3-bed) | $2,500–$6,500 |
| Insulation top-up (existing ceiling) | $800–$2,000 |
| Vapour barrier (underfloor, per m²) | $15–$35/m² |
| Draught stopping (doors, windows) | $300–$900 |
| Insulation assessment / report | $150–$400 |
All prices GST inclusive. Prices before any Warmer Kiwi Homes subsidy.
Wellington Insulation Market
Wellington's cold, damp winters make insulation critical. Government subsidies (Warmer Kiwi Homes) can cover 80–90% of ceiling and underfloor insulation costs for eligible Wellington homeowners.
Warmer Kiwi Homes Programme
The NZ Government's Warmer Kiwi Homes programme provides subsidies of 80–90% of ceiling and underfloor insulation costs for eligible homeowners:
Eligibility: Own and live in your home, and receive a qualifying benefit (Community Services Card, NZ Super, Working for Families, etc.) OR live in a lower-income area.
What's covered: Ceiling insulation, underfloor insulation, and sometimes heating (heat pumps, wood burners).
How to apply: Contact an approved insulation provider in Wellington — they will assess eligibility and manage the application. You don't need to apply to EECA directly.
If you qualify, ceiling + underfloor insulation could cost you as little as $200–$600 out of pocket.
NZ Insulation Standards
Healthy Homes Standards: Rental properties must meet minimum insulation levels (R-value requirements) under the Residential Tenancies Act. Landlords in Wellington must comply or face fines.
NZ Building Code: New builds must meet Schedule 1 energy efficiency requirements. Insulation must achieve minimum R-values per climate zone.
Wellington climate zone: Wellington is in NZ climate zone 3 — your installer will specify the correct R-value for your zone.
Insulation Types
Pink Batts / glasswool: The standard NZ product. Available in ceiling and underfloor grades. Affordable and effective.
Polyester: Itch-free alternative to glasswool. Slightly higher cost but easier to handle. Good choice where roof access is limited.
Blown-in / loose fill: Used for retrofit ceiling insulation where batt installation is difficult. Blown into the ceiling cavity.
PIR / rigid foam: Used for specific applications — under slabs, in walls. Higher R-value per mm but more expensive.
Find Wellington insulation installers: Insulation Installers Wellington | Post a Job Free
Frequently Asked Questions
How much does ceiling insulation cost in Wellington? Full installation in a standard 3-bed home: $1,800–$4,500. With Warmer Kiwi Homes subsidy (if eligible): potentially $200–$600 out of pocket.
Am I eligible for the Warmer Kiwi Homes subsidy in Wellington? If you own and live in your home and receive a qualifying benefit, you likely qualify. Contact a local approved insulation installer — they'll check your eligibility for free.
What R-value do I need for Wellington? Ceiling: minimum R3.3 (zone 1) to R6.6 (zone 3). Underfloor: minimum R1.3 (zone 1) to R2.0 (zone 3). Your installer will advise the correct specification.
Related: Heat Pump Installation Cost NZ | Double Glazing Cost NZ | Insulation Installation Cost NZ